Mirror Stainless Steel Coil

Thickness:0.03-3.00mm

Width:3mm-2500mm

Standard:AISI, ASTM, DIN, JIS, GB,JIS, SUS, EN, etc

Certification: ISO SGS BV CE DNV

Material:201 202 301 304 304L 304H 309 309S 310 310S 314 316 316L 316Ti 317 317L 321 321H 347 347H XM-19 904L etc.

Surface:2B, No.1, BA, 2BA, NO.4, HL brushed, 8K Mirror, checkered, etched, embossing etc

Stock: 5000 Ton/Month

Product Introduction

1. Strong gloss: Due to the mirror effect, the decorative panel is more beautiful and bright;

2. Strong anti-fouling: The surface is very smooth and not easily contaminated with dust, easy to clean and maintain;

3. Good scratch resistance: Can withstand strong hits and scratches;

4. Good wear resistance: More wear resistance than ordinary steel plate, long service life;

5. Good high temperature resistance: It can be used normally at a high temperature of 300 degrees Celsius without deformation.

6. Good environmental performance (recyclable) : Comply with ROHS standards.

7. Good process performance (can do a variety of complex modeling)

8. Wide variety of colors

Specification

STANDARD SIZE STOCK LIST & NON-STANDARD SIZE CUSTOMIZATION

Product Name 201 202 301 304 304L 304H 309 309S 310 310S 314 316 316L 316Ti 317 317L 321 321H 347 347H XM-19 904L
Origin TISCO, POSCO, JISCO,TINGSHAN
Shape Stainless Steel Sheet
Technique Cold Rolled/ Hot Rolled
Surface 2B, No.1, BA, 2BA, NO.4, HL brushed, 8K Mirror, checkered, etched, embossing etc
Color Natural color, can be titanium gold color, titanium black color, rose red, champagne gold color, sapphire blue, bronzed    color, coffee color, purple red, green, emerald green, copper red color and anti-finger print, etc.
Thickness 0.03mm-3mm or as required
Width 3mm-2500mm or as required
Edge Mill edge, slit edge
Inspection The Third Party inspection can be accepted
MOQ 5 Ton
Supply ability 10000 Ton/ Per Month
Delivery time Within 8 days after confirming the order
Payment term 30% TT as deposit and the balance paid against copy of B/L
Package PVC+ waterproof paper + strong sea-worthy wooden package
Advantages Showing the splendor of your quality, wear-resistant as well , strong corrosion resistance and decorative effect

Chemical Composition

STOCK GRADE & SPECIAL MATERIAL CUSTOMIZATION

Type Grade Grade Chemical Component %
C Cr Ni Mn P S Mo Si Cu N Other
Austenitic 201 SUS201 ≤0.15 16.00-18.00 3.50-5.50 5.50-7.50 ≤0.060 ≤0.030 - ≤1.00 - ≤0.25 -
202 SUS202 ≤0.15 17.00-19.00 4.00-6.00 7.50-10.00 ≤0.060 ≤0.030 - ≤1.00 - ≤0.25 -
301 1.4310  ≤0.15 16.00-18.00 6.00-8.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - ≤0.10 -
304 1.4301 ≤0.07 17.00-19.00 8.00-10.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
304L 1.4307 ≤0.030 18.00-20.00 8.00-10.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
304H 1.4948 0.04-0.10 18.00-20.00 8.00-10.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
309 1.4828 ≤0.20 22.00-24.00 12.00-15.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
309S * ≤0.08 22.00-24.00 12.00-15.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - -
310 1.4842 ≤0.25 24.00-26.00 19.00-22.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.50 - - -
310S * ≤0.08 24.00-26.00 19.00-22.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.50 - - -
314 1.4841 ≤0.25 23.00-26.00 19.00-22.00 ≤2.00 ≤0.045 ≤0.030 - 1.50-3.00 - - -
316 1.4401 ≤0.08 16.00-18.50 10.00-14.00 ≤2.00 ≤0.045 ≤0.030 2.00-3.00 ≤1.00 - - -
316L 1.4404 ≤0.030 16.00-18.00 10.00-14.00 ≤2.00 ≤0.045 ≤0.030 2.00-3.00 ≤1.00 - - -
316Ti 1.4571 ≤0.08 16.00-18.00 10.00-14.00 ≤2.00 ≤0.045 ≤0.030 2.00-3.00 ≤1.00 - 0.1 Ti5(C+N)~0.70
317 * ≤0.08 18.00-20.00 11.00-15.00 ≤2.00 ≤0.045 ≤0.030 3.00-4.00 ≤1.00 - 0.1 -
317L 1.4438 ≤0.030 18.00-20.00 11.00-15.00 ≤2.00 ≤0.045 ≤0.030 3.00-4.00 ≤1.00 - 0.1 -
321 1.4541 ≤0.08 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - Ti5(C+N)-0.70
321H * 0.04-0.10 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - Ti5(C+N)~0.70
347 1.4550  ≤0.08 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 - ≤1.00 - - Nb≥10*C%-1.10
347H 1.494 0.04-0.10 17.00-19.00 9.00-12.00 ≤2.00 ≤0.045 ≤0.030 ≤1.00 - - Nb≥10*C%-1.10
XM-19 Nitronic50 ≤0.06 20.50-23.50 11.50-13.50 4.0-6.0 ≤0.045 ≤0.030 1.50-3.00 ≤1.00 - 0.2-0.4 Nb:0.10-0.30 V:0.10-0.30
904L N08904 ≤0.02 19.0-23.0 23.0-28.0 4.0-5.0 ≤0.045 ≤0.035 - ≤1.00 - 0.1 Cu:1.0-2.0
Duplex 2205 S32205 ≤0.03 22.0-23.0 4.5-6.5 ≤2.00 ≤0.030 ≤0.020 3.0-3.5 ≤1.00 - 0.14-0.20 -
2507 S32750 ≤0.03 24.0-26.0 6.0-8.0 ≤1.20 ≤0.035 ≤0.020 3.0-3.5 ≤0.80 0.5 0.24-0.32 -
* S32760 ≤0.03 24.0-26.0 6.0-8.0 ≤1.00 ≤0.030 ≤0.010 3.0-4.0 ≤1.00 0.5-1.00 0.2-0.3 -
2304 S32304 ≤0.03 21.5-24.5 3.0-5.5 ≤2.50 ≤0.040 ≤0.030 0.05-0.6 ≤1.00 0.05-0.6 0.05-0.2 -
329 1.4460  ≤0.08 23.00-28.00 2.00-5.00 ≤1.00 ≤0.040 ≤0.030 1.00-2.00 ≤0.75 - - -
Ferrite 409 S40900 ≤0.03 10.50-11.70 0.5 ≤1.00 ≤0.040 ≤0.020 - ≤1.00 - ≤0.030 Ti6(C+N)-0.50 Nb:0.17
430 1Cr17 ≤0.12 16.00-18.00 - ≤1.00 ≤0.040 ≤0.030 - ≤1.00 - - -
444 S44400 ≤0.025 17.50-19.50 1 ≤1.00 ≤0.040 ≤0.030 1.75-2.5 ≤1.00 - 0.035 -
446 S44600 ≤0.20 23.00-27.00 0.75 ≤1.50 ≤0.040 ≤0.030 1.50-2.50 ≤1.00 - ≤0.25 -
Martensite 410 1Cr13 0.08-0.15 11.50-13.50 0.75 ≤1.00 ≤0.040 ≤0.030 - ≤1.00 - - -
410S * ≤0.080 11.50-13.50 0.6 ≤1.00 ≤0.040 ≤0.030 - ≤1.00 - - -
416 Y1Cr13 ≤0.15 12.00-14.00 3.0  ≤1.25 ≤0.060 ≥0.15 - ≤1.00 - - -
420 2Cr13 ≥0.15 12.00-14.00 - ≤1.00 ≤0.040 ≤0.030 - ≤1.00 - - -
420J2 3Cr13 0.26-0.35 12.00-14.00 - ≤1.00 ≤0.040 ≤0.030 - ≤1.00 - - -
431 1Cr17Ni2 ≤0.20 15.00-17.00 1.50-2.50 ≤1.00 ≤0.040 ≤0.030 - ≤0.80 - - -
440C 11Cr17 0.95-1.20 16.00-18.00 - ≤1.00 ≤0.040 ≤0.030 0.75 ≤1.00 - - -
PH 630 17-4PH ≤0.07 15.00-17.50 3.00-5.00 ≤1.00 ≤0.035 ≤0.030 - ≤1.00 3.00-5.00 - Nb 0.15-0.45
631 17-7PH ≤0.09 16.00-18.00 6.50-7.50 ≤1.00 ≤0.035 ≤0.030 - ≤1.00 ≤0.50 - Al 0.75-1.50
632 15-5PH ≤0.09 14.00-16.00 3.50-5.50 ≤1.00 ≤0.035 ≤0.030 2.00-3.00 ≤1.00 2.5-4.5 - Al 0.75-1.50

Factory

Shipping and Packaging

PROFESSIONAL EXPORT PACKING

Send message

  • Your Name

  • Your Phone

  • *Your E-mail

  • Your Country

  • *Message

Leave a Message

Please contact us for free quotation by form below. We promise the quickest response within 24 hours:

Home WhatsApp Mail Inquiry